Description

MPS-3500H, 3,5 kW/24 V

The device is a combination of pure sine wave inverter, inverter and MPPT controller for solar panels. It is therefore a backup source with backup from a public network or generator , a battery charger and an MPPT solar regulator, while the backup priority can also be set inversely, i.e. public grid priority and backup from batteries or PV panels.

Main Features

• Power 3500VA/3500W.
• Pure sine wave output, output power factor 1.0.
• Programmable power priority for PV, battery or grid.
• User adjustable charging current and voltage.
• Wide PV input range (120Vdc -500Vdc), 110A MPPT SCC.
• Work without batteries on a sunny day.
• Use with a lithium battery.

The main parameters

• System voltage 24V
• Pure sine wave inverter
• Battery charging current when operating on mains 80A
• AC or BAT priority adjustable
• Compatible with generator or mains voltage, inverter phases with AC input, allowing the use of three identical inverters with monitoring relays for powering three-phase systems
• Protection against overload, short circuit and battery discharge
• Automatic restart after overload
• Smart battery charger
• Usable batteries: lead AGM, AGM GEL, with liquid dielectric, LiFePO4
• For LiFePO4, the necessary parameters must be set in USE mode – for experienced users only
• Soft start for gradual start of loads
• Consumption in standby mode 10W
• Solar panels with a maximum no-load voltage of 120-500 V and a maximum current of 20 A (max. 5000 W)