Description
Fuse with fuse holder SUNTREE 1000VDC 15A
1. A range of 10 x 38 mm fuses specially designed to protect photovoltaic chains. These fuses are capable of interrupting low currents and overcurrents associated with faulty photovoltaic string networks (reverse current, multi-network fault).
2. DC fuse mainly used in DC combiner box in solar photovoltaic systems. When the photovoltaic panel or inverter causes overload or short circuit, it will trip immediately to protect the photovoltaic panels. The DC fuse is also used to protect other electrical parts of the DC circuit in the event of an overload or short circuit.
|
Type
|
SRD-30
|
|
Fuse Size
|
10x38MM
|
|
Poteaux
|
1P
|
|
Tension nominale
|
C.C 1000V
|
|
Rated current
|
15
|
|
Short circuit breaking capacity
|
33KA
|
|
Maximum power attenuation
|
1.5 W
|
|
Degree of protection
|
IP20
|
|
Connection
|
2,5-10 mm2
|
|
Ambient operating temperature
|
-30~+70°C
|
|
Resistance and moist heat
|
Class 2
|
|
Elevation
|
≤ 2000
|
|
Installation method
|
Installation on TH35-7.5/DIN 35 rail
|
|
RH (relative air humidity)
|
at +20°C, do not exceed 95%; at +40°C, do not exceed 50%
|
|
Pollution class
|
3
|
|
Installation environment
|
the place without obvious vibration or impact
|
|
Installation class
|
Ⅲ
|
|
LxHxL
|
L18 x H89 x L90 mm
|
|
Weight (kg)
|
0,07
|
1. Photovoltaic system fuse conforms to UL248-1.
2. Photovoltaic battery DC fuse designed to be used for photovoltaic (PV) system.
3. The main effect is to protect the solar panels. The points of the solar panels in good condition are broken.
4. Fault light cells break points at the same time, do not affect other normal battery light work.
5. Technical Data Nominal Coltage: DC1000V
6. Breaking capacity: 25KA
WIRING DIAGRAM










Leave feedback about this